Monday 14 May 2012

Burgundian Ordonnance - 13th Company




My first mounted completed unit of mounted men at arms, the first of several which will form the offensive backbone of Charles the Bold's army, representing the 13th company of the Ordonnance.  This unit uses the most recent Perry plastic box, with a couple of metal scurrors from the WR range.

The 13th company had several captains during Charles' dukedom. Around 1475 following the siege of Neuss, Thanaseor de Capoue was appointed. This was a time when an increasing number of italian condottiere were being sought and recruited by the duke in a deliberate policy to increase the professionalism of his forces, so superseding many of those originally appointed from his Burgundian territories. Capoue is denoted in the central stand, wearing a coat with his personal coat of arms. The guidon for the 13th Company appears to have portrayed the image of St John, so I've used one of the excellent downloads from the Krigsspil website. The sharp-eyed amongst you will notice this is a different guidon to the previous post, as I realised that I'd attached the wrong one!

I decided to represent these 'chef de chambres', as contemporary documents refer to them as, on unbarded horses. I also plan to do this with the remainder of the contingents. There is no hard evidence for this approach. The 1471 ducal ordinances stated that such men at arms must provide a horse with a combat saddle and chamfron. Near contemporary illustrations are also inconclusive; the 'Master WA' drawings show a group of men at arms or coustillers all on unbarded horses. Diebold Schilling's chronicle of c1480 shows most of the Burgundian men at arms at the battle of Morat on plate-armoured mounts bearing various Charles' devices, such as crosses and flints (which may just be an artist representation to denote them, rather than reflective of actual men at arms). The reality was that such armour was expensive and so unlikely to be very widespread, even with the deep pockets of the Burgundian dukes.  So I'll save the barding for units with the main commanders, to denote them more easily on the battlefield.

The coustiller used is carrying a heavy lance, which again is a bit of licence on my part. The 1471 ordinances required them to carry a 'good javelin'. The assumption is that coustillers formed a second rank to the men at arms and if so, then I believe it's reasonable to assume that some may have used a lance, rather than a spear, to add to the impetus of a charge.

I've also added to some of the figures another element of the Burgundian Ordonnance troops - the red saltire emblem that denoted them in the field. As laid out in 1471, they were provided with crosses made of cloth to attach their harness. I've cut these from thin foil  and superglued on - but in future I'll try pre-cut plastic strip to try and achieve thinner crosses.






15 comments:

  1. An excellent looking unit with lots of movement, good call on the barding and some very nicely painted horses. How many units of MAA will your army require?

    ReplyDelete
    Replies
    1. Planning to do 6 (so another 5 to go), plus 2 commanders -one for Duke Charles and another for Antony of Burgundy (he who is shown at the top of the page)...but plans can change...

      Delete
  2. Very nice unit there and great basing too which sets them off nicely.

    ReplyDelete
  3. once again, incredible! thanks for the inspiration, i thought i wasn't going to paint tonight! now i think i have to..

    ReplyDelete
  4. Stunning work ! Very good inspiration !

    Very nice with the historical background.

    Best regards Michael

    ReplyDelete
  5. Fantastic looking figures and interesting history. I've already altered the horse tack on some of my models after reading your previous post.

    Regards,
    Matt

    ReplyDelete
  6. Lovely. I really like the light blue you´ve used. The barding. I agree with you about the cost, and it would have been only affordable to a few..maybe they were used in the front line, with the mass of the unarmoured mounts following up.
    Cheers
    Paul

    ReplyDelete
  7. PS..an idea to get thinner Saltire, maybe with sticking plaster..the type made from weaved material. I´ve started using it for harness´s etc.
    All I do is stick a piece to a flat surface, CD box is good, and cut thin strips with a scalpel..I´ve managed to get strips less than 2mm´s wide so far. Being plastic based it also glues well.

    ReplyDelete
  8. Looking at the pictures I noticed you didn't have much in the way of armour for your horses, only to read your report and for it all to make perfect sense.
    Another superbly painted unit for what has to be one of the best collections of figures out there.

    ReplyDelete
  9. beautiful work simon...
    for the saltires i think you should use procreate even if you roll it out cut them when dry then stick them on, but i think you should try sculpting them on you will get hooked! put the cross even if its rough then use a scalpel to neaten it

    cheers

    ReplyDelete
    Replies
    1. Ah, using Procreate is easy for you to say! Not sure how I'd get on with my lesser sculpting skills...!!

      Delete
  10. Such a treat to look at! And I enjoyed the historical background as well.

    ReplyDelete
  11. All is perfect, the figs, the painting style, the photos, and the background!
    Really great!

    ReplyDelete